欧美日本高清在线不卡区,无码 制服 丝袜 国产 另类,与子乱对白在线播放单亲国产,性夜影院爽黄e爽

Machine Features:

Simple, durable, high-precision, easy operating, safe and reliable performance;

1. Reasonable structure, dependable materials

A. For casting materials, using high standards of ductile iron is twice as gray

  iron in tensile strength. Furthermore, casting the whole machine will make it

  work stable and durable;
B. Using ball joint, eccentric wheel and Japan-based bearing and pressure

  springs in the inner part of machine help it get a stable and reliable pressure

  in cutting depth;

C. The template of upper & lower die cutter can be use in the same model machine,  

  which help operator take full advantage of them.

 
2. High precision

A.    Blanking pressure accuracy is up to 0.003mm. Through using the touch

screen to adjust the pressure, keep touching the increase or decrease key to speed up the adjustment speed;

B.  Accuracy of the material feeding is ± 0.05mm; Punching accuracy is ±  

   0.03mm;

C. The thickness error of upper & lower die cutter is ±0.02mm. Means the

   machine pressure is flat, operators no need to adjust partial pressure when

   they request the machine cut the upper materials and keep the lower one in

   good state;

3. Maximum blanking force

The punching force is up to 12 tons by using high-power & large speed reducing ratio gear motor;

4. High speed

The fastest speed of the host machine is 180 times per minute. In term of the programming, the hops in distance match automatically with materials feeding, which provide convenience for new user. Also, operator can set up the time and speed of material-pulling including the position of stopping to achieve efficient production.

5. High automation

A. Regulator system adopts touch screen digital control. it is convenient and

  quick for operators to directly input digital for the pressure amount of cutting

  die; Digital control of touch screen in voltage regulating system helps

  operator directly input the pressure of die cutter.

B. Advanced intelligent system, simple and clear in interface.

C. High degree of safety, optical safety sensor and safe doors are provided on

  each nip point. Once shielding each sensor, the machine will shut down

  immediately.

D. Operator needs to press the run button both to open machine: to prevent  

  misuse and protect the safety of operators;

E. When the safe gate is still open, the machine cannot open for protecting the

  machine;

F. The system contains fault display page, to show the fault diagnose and fault

  elimination function.

6.Diversity

A.    Can use woodcut knife, plastic-cut knife, graver, etching knife, QDC metal

mold and so on;

B. The hardware mold of standardization installation, fast adjustment;

C. Easy to realize automatic multiple punching;

D. Can be combined randomly or fission processing line;